The ISO35TDW is an isolated differential Line Transceiver with integrated oscillator outputs that provide the primary voltage for an isolation transformer. The device is a full-duplex differential line transceiver for RS-485 and RS-422 applications that can easily be configured for half-duplex operation by connecting pin 11 to pin 14 and pin 12 to pin 13. This device is ideal for long transmission lines since the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical isolation barrier of the device is tested to provide 4242VPK of isolation per VDE for 60s between the bus-line transceiver and the logic-level interface. Any cabled I/O can be subjected to electrical noise transients from various sources. These noise transients can cause damage to the transceiver and/or near-by sensitive circuitry if they are of sufficient magnitude and duration. The ISO35T can significantly reduce the risk of data corruption and damage to expensive control circuits.

• Thermal shutdown protection
• Failsafe receiver (bus open, bus shorted and bus idle)
• Logic inputs are 5V tolerant
• 1Mbps Signalling rate
• 1/8 Unit-load (up to 256 nodes on the bus)
• 16pF Typical low-driver bus capacitance
• 50kV/µs Typical transient immunity
• Green product and no Sb/Br

Полупроводники - МикросхемыДрайверы и ИнтерфейсыДрайверы RS232 / RS422 / RS485
Код: 2496483